Variac : Single & Three Phase (0.7A*, 1A-28A)
|
SINGLE LAYER PANEL (F) MOUNTING |
RG |
TYPE |
DIMENTIONS IN MM. |
|
A |
B |
C |
Ht |
1 |
1/2A-1P |
130 |
108 |
92 |
90 |
1 |
4A-1P |
200 |
175 |
145 |
95 |
1 |
10A-1P |
200 |
175 |
145 |
125 |
1 |
15A-1P |
245 |
220 |
176 |
135 |
1 |
28A-1P |
360 |
295 |
235 |
165 |
2 |
2A-3P |
130 |
108 |
92 |
308 |
2 |
4A-3P |
200 |
175 |
145 |
440 |
2 |
10A-3P |
200 |
175 |
145 |
490 |
2 |
15A-3P |
245 |
220 |
176 |
490 |
2 |
28A-3P |
360 |
295 |
235 |
580 |
(Dimensions & Weight are subjected to be change at the description of manufacturers, kindly reconfirm)
|
We specialise in
tailor made Variacs depending on the customers exact current requirements. This helps the customer select a proper rating suitable for his application (For eg. If the customer's actual upper limit of current is 20A on a continuous basis and in the Extended Voltage range, then we recommend a higher rating
Variacs (say 23A) & then tailor make it for his applications. We also take care to cover up his entire Voltage range (either 0-230 V, 0-260V,
0-110V etc.) We can provide Roller Carbon Brushes fabricated from a Special Electrical grade.
Portable (Enclosed ) Models are available in the entire range.
|
|
Single Layer Variacs (40A-200A)
|
Type |
Current Rating in AMPS |
L (CM) |
W (CM) |
Ht (CM) |
Oil Qty in Lit (Approx) |
40A-3P |
40 |
70 |
65 |
115 |
120 |
50A-3P |
50 |
70 |
85 |
115 |
135 |
60A-3P |
60 |
95 |
85 |
115 |
150 |
75A-3P |
75 |
105 |
95 |
150 |
270 |
100A-3P |
100 |
115 |
105 |
150 |
300 |
150A-3P |
150 |
130 |
125 |
160 |
515 |
200A-3P |
200 |
140 |
135 |
160 |
570 |
(Dimensions & Weight are subjected to be change at the description of manufacturers, kindly reconfirm) |
This series is available in open type as well as Oil cooled type. We specialise in winding these Variacs with thick Super
enameled Cu. Wire and is a pioneering step in the Indian Industry. The Higher ratings are normally Oil Cooled. The Industry feedback on the earlier ones wound with Double Cotton Covered Wire is not Excellent as the cotton covering at times obstructs the movement of Carbon hampering the entire operation. The use of Su. En. Wire eliminates this, giving a great relief. We can presently wind VARIACS with 6 SWG Wire.
Increase in oil quantity & Larger dissipation area of the oil Tank allows increase in rating upto 25% (Approx.) We Can provide radiators in place of tubes for oil circulation & cooling. We can provide Roller Carbon Brushes 3/4 in parallel for these oil cooled variacs. These roller brushes are fabricated from a special grade
Carbon. DOUBLE LAYER VARIACS of Higher ratings can also be manufactured with specific Voltage range under special request. These higher rating variacs are a trusted source of clean, efficient, reliable, distortion free AC power supply. |
|
|
|
RADIOTONE VARIAUTO :- |
This variauto is a continuously variable Auto Transformer used for smooth control of Voltage. |
|
STANDARD RANGE :- |
a) 0.75 Amp, 0-270V |
b) 2 Amp to 100 Amp, 0-270V |
c) Single /Two/Three Phase |
d) Open Type /Enclosed Type |
e) Air/Oil Cooled. |
f) AC Motorised Version |
|
SPECIFICATIONS :- |
No Load Current (NLC) Less than 2% of rated capacity |
Testing: as per B.I.S. 5142 |
|
|
TAILOR MADE 110V / 400
Hz. at required current ratings possible. |
|
|
|
|